manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 50

1-38

Lap Belt

When you sit in the center seating position, you have a
lap safety belt, which has no retractor. To make the belt
longer, tilt the latch plate and pull it along the belt.

To make the belt shorter, pull its free end as shown until
the belt is snug.

Buckle, position and release it the same way as the lap
part of a lap

-

shoulder belt. If the belt isn’t long enough,

see “Safety Belt Extender” at the end of this section.

Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt quickly
if you ever had to.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands