manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 242

4-28

If You’re Caught in a Blizzard

If you are stopped by heavy snow, you could be in a
serious situation. You should probably stay with your
vehicle unless you know for sure that you are near help
and you can hike through the snow. Here are some
things to do to summon help and keep yourself and your
passengers safe:
D Turn on your hazard flashers.

D Tie a red cloth to your vehicle to alert police that

you’ve been stopped by the snow.

D Put on extra clothing or wrap a blanket around you.

If you have no blankets or extra clothing, make body
insulators from newspapers, burlap bags, rags, floor
mats 

--

 anything you can wrap around yourself or

tuck under your clothing to keep warm.

You can run the engine to keep warm, but be careful.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands