manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 299

6-12

Engine Oil

United States

Canada

If the LOW ENG OIL LEVEL message appears on 
the instrument panel, it means you need to check your
engine oil level right away. For more information, 
see “Low Oil Level Message” in the Index.

You should check your engine oil level regularly; this is
an added reminder.

Checking Engine Oil

It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.

3400 (Code E) 

V6 Engine

3800 (Code K) 

V6 Engine

The engine oil dipstick handle is the yellow loop 
located near the front of the engine. See “Engine
Compartment Overview” in the Index for more
information on location.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands