manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 162

2-90

Hot Coolant Temp

United States

Canada

This message is displayed when the cooling 
system temperature gets hot. A chime will sound
continuously, also.

Check the coolant temperature gage and the coolant
level. See “Engine Coolant,” “Engine Coolant
Temperature Gage” and “Engine Overheating” in 
the Index for further information.

Low Coolant Level

United States

Canada

This message is displayed when the cooling system is
low on coolant. Four chimes will also sound.

The engine may overheat. See “Engine Coolant” 
in the Index and have your vehicle serviced as soon 
as possible.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands