manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 161

2-89

Traction Active

United States

 Canada

This message will appear when the traction control
system is limiting wheel spin.

The message will stay on a few seconds after the
traction system stops limiting wheel spin.

Battery Life Indicator

When the vehicle is started
this message will be
displayed for three seconds.

If the message is displayed when the engine is running,
you may have a problem with your charging system. If
there is a problem with the charging system, four chimes
will sound when the message comes on. The battery
display will also stay on while the key is in ON until the
engine is started.

If the message stays on after starting the engine it 
could indicate a problem with the generator drive belt,
or some other charging system problem. Have it
checked right away. Driving with this message on 
could drain your battery.

If you must drive a short distance with this message
displayed, it helps to turn off all your accessories.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands