manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 121

2-49

1. Press the cruise control

ON button on the
steering wheel to turn 
it on.

2. Get up to the speed you want.

3. Press the SET button on your steering wheel 

and release it.

4. Take your foot off the accelerator.

The CRUISE light on the instrument panel cluster will
come on after the cruise control has been set to the
desired speed.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course shuts off
the cruise control. But you don’t need to reset it.

Once you’re going about 
25 mph (40 km/h) or more,
press the RES button on
your steering wheel. You’ll
go right back up to your
chosen speed and stay there.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands