manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 153

2-81

Traction Control System Warning Light

The traction control
system warning light
may come on for the
following reasons:

D If you turn the system off by pressing the TRAC

OFF button located on the center console, a chime
will sound and the warning light will come on and
stay on. To turn the system back on, press the 
button again. The warning light should go off. 
See “Traction Control System” in the Index for 
more information.

D If there’s a brake system problem that is specifically

related to traction control, the traction control system
will turn off and the warning light will come on. If
your brakes begin to overheat, the traction control
system will turn off and the warning light will come
on until your brakes cool down.

If the traction control system warning light comes on
and stays on for an extended period of time when the
system is turned on, your vehicle needs service.

Engine Coolant Temperature Gage

United States

-

3400 V6

Engine Cluster

United States

-

3800 V6

Engine Cluster

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands