manualshive.com logo in svg

Chevrolet 2001 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2001 Monte Carlo Owner'S Manual Download Page 316

6-29

Radiator Pressure Cap

The radiator pressure cap is located in the front of 
the engine compartment on the passenger’s side, 
near the diagonal cross brace. See “Engine
Compartment Overview” in the Index for more
information on location.

NOTICE:

Your radiator cap is a 15 psi (105 kPa)
pressure

-

type cap and must be tightly installed to

prevent coolant loss and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.

Power Steering Fluid

The power steering fluid reservoir is located toward the
rear of the engine compartment, on the passenger’s side.
See “Engine Compartment Overview” in the Index for
more information on location.

Summary of Contents for 2001 Monte Carlo










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands