21
6. Smoke Control
The
Chesney’s 4,5,6,8 series stoves are DEFRA exempt appliances that
can be used in Smoke Control Zones.
The “Smoke Tab” is fitted on the underside of the fire cube on the left hand
side and must be removed with the retaining bolt and discarded.
The Milan and Shoreditch stoves have heat shields under the stove that will
have to be removed by undoing the four hexagonal bolts to reve
al the “Smoke
Tab”.
Always replace the heat shields.
Stove
Operation in Smoke Control Zones
Make up fire as described page 28. Do not reduce the Air Flow Bar until the
kindling and logs are fully blackened, this may take 2-5 minutes (moisture
content and type of wood will dictate this) on lighting and on refuelling. You
must always refuel on a hot bed of ash.
Do not over load the stove.
The quality of your fuel is of utmost importance.
Only burn HETAS approved wood logs and smokeless fuels (coals).
Summary of Contents for Alpine 4 Series
