Chesney's Alpine 4 Series User And Installation Manual Download Page 18 | Manualshive

Page: 18 / 46

background image

18

4. Installation

In addition to these instructions the requirements of BS 8303 and BS EN
15287 must be fulfilled. Local Authority Bylaws and Building Regulations
regarding the installation of Solid Fuel burning appliances, flues and chimneys
must also be taken into account.
The installation is a notifiable building works as defined in the building
regulations and that it is a legal requirement under England and Wales
Building Regulations that the installation is either carried out under Local
Authority Building Control approval or is installed by a Competent Person
registered with a Government approved Competent Persons Scheme. HETAS
Ltd operate such a Scheme and a listing of their Registered Competent
Persons can be found on their website at www.hetas.co.uk.

Therefore this appliance and installation must comply with the following
regulations:-

British Standards BS 8303. BS EN 15287-1:2010

Building Regulation Approved Document J for England and Wales

Building Regulations Part F for Scotland

Building Regulations/1997 Technical Guidance Approved

Document J-Heat Producing Appliances for the Republic of Ireland

Registered Body: HETAS (GB only) INFO (Ireland)

This appliance must be fitted by an approved installer or inspected and signed
off by a Building Control Officer. For a list of authorised installers

www.hetas.co.uk/nearest_member

and follow the links or phone 0845 634

5626 and ask the HETAS team.

«
...
16
17
18
19
20
...
»

Summary of Contents for Alpine 4 Series















































Reviews:

No comments

Related manuals for Alpine 4 Series

Brand: Cadel Pages: 40

Brand: Quadra-Fire Pages: 20

Brand: HWAM Pages: 56

Brand: Daiwa Pages: 17

Brand: HASE Pages: 26

Brand: HASE Pages: 44

Brand: HASE Pages: 48

Brand: St. Croix Pages: 25

Brand: St. Croix Pages: 25

Brand: Blaze King Pages: 51

Brand: Bosca Pages: 48

ZETA10L, ZETA10P, ZETA10C

Brand: Oak Stoves Pages: 22

Brand: Nordica Pages: 108

Brand: Kalor Pages: 38

Brand: Hamlet Pages: 34

Brand: EasyFire Pages: 11

Brand: Hastings Pages: 17

Brand: Samson Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands