Chen Hsong Ai-02, Operation Manual

Page: 29 / 124

Ai-02 Operation Manual
5.14 Setting of Core pulling A
Setting Interface of Core Pulling A (15)
(1)
Press for four times and then the interface of setting core
pulling A (15) will appear.
(2)
Useto select the parameters of core pulling to be set,
Input the numerical value and press the, then the set is
completed.
Of which,
"AA"
：
Inserting core: useto select from the following
four modes
(1) Before mould clamping
(2) After mould clamping
(3) Mould clamping midway (set clamping position of
inserting core starting)
29