Chen Hsong Ai-02, Operation Manual, Page: 25 / 124

Ai-02 Operation Manual
Function of automatic purge is used when resin is changed. Purge time is the
number of purging cycle
5.11 Setting of Ejector
Interface of Ejector Setting (12)
（
1
）
Press and you can enter into interface of Ejector setting
(12).
（ 2 ） Useto select the parameters of Ejector to be set,
Input the numerical value and press the, then the
set is completed.
Of which,
"AA"
：
Set the frequency of ejector
"BB" ： Set the frequency and shake of Ejector (used with several
ejectors)
"CC"
：
Show pause time of ejector
"DD"
：
Set the position of mould opening with synchronizing ejector
in the process of mould opening
"EE"
：
Useto select the following three ejector
actions
25