Chen Hsong Ai-02, Operation Manual

Page: 57 / 124

5.31 Injection speed curve
Injection speed curve interface (38)
Press twice to call the injection speed curve screen.
Press
，
move the cursor position
，
press key to
save the previous curve as standard curve for comparsion
。
Move cursor to position
，
press or key to select the
display of standard curve ， if it is“ON”, the standard
curve will be display and compared with every new injection curve in e each
cycle.
Move cursor to for setting the maximum injection speed. If the
maximum 99 % injection speed just overlap the top of the graph, the maximum
speed setting is correct. If not adjust the maximum injection speed.