Chen Hsong Ai-02, Operation Manual

Page: 83 / 124

clamping force adjustment. By turning ON this function
，
automatic clamping force
adjustment wil be done after mold thickness adjustment was completed 。
is the position where the clamping force can be achieved by
automatic clamping force adjustment
，
is the point for switching high
pressure clamping 。
Manual mold thickness adjustment
：
Press the mold adjustment function ON
，
then press key to move the
clamping unit forward
，
thickness become smaller
；
Press key
，
clamping
unit move backward
，
mold thickness become bigger
；
press key can exit
mold adjustment immediately
。
Note
：
Quit from mold adjustment screen will reset all the alarm and output for
mold adjustment.