Chen Hsong Ai-02, Operation Manual

Page: 94 / 124

AL077
In reserve Failure to use
AL078
In reserve Failure to use
AL079
In reserve Failure to use
AL080
In reserve
Failure to use
AL081
In reserve Failure to use
AL082
In reserve Failure to use
AL083
In reserve Failure to use
AL086
Ejector does not backspace Does not detect the backspacing signal of the
ejector in mould clamping
MG01 Mould clamping distance has
terminated
Display the finishing of the mould clamping action
in hand operation
MG02 Mould opening distance has
terminated
Display the finishing of the mould opening action
in hand operation
MG03 Mould opening distance has not
terminated
Display the non-finishing of the mould opening
distance in hand mould adjustment or ejection
operation
MG04 Ejection distance has terminated Displaying the finishing of the ejection action in
hand operation
MG05 Ejection retraction distance has
terminated
Display the finishing of the ejection retraction in
hand operation
MG06 Plasticizing distance has terminated Display the finishing of the plasticizing action in
hand operation
MG07 Back lash distance has terminated Display the finishing of the back lash action in
hand operation
MG11 Temperature of the feeding pipe is in
preheating
Heat preservation function of the feeding pipe is
in activation
MG12
Plasticizing is in delay Plasticize after terminating the ejection and
reaching the delaying time