V1.1, May 12, 2020
Companion User Manual
©Copyright 2020 by CHEELCARE
TM
. All rights reserved.
P a g e
|
11
2. Insert the folded Docking Module between the mounted clamps. Keep around
12mm(0.5”)
space between the crossbraces of the chair and the edge of the Docking
Module.
3. Take the screws and locknuts from the bag attached to the Docking Module. Insert the
screws from inside the Docking Module into the mounting holes of the clamps. Place a
locknut onto the screw from the opposite side. Tighten the locknuts onto the screws to
secure the connection of the Docking Module to the clamps.
4. Now, you should tighten the screws of the clamps with the Allen key to secure them to
the frame of the wheelchair.
5. Your chair is now equipped with the lightweight universal Docking Module developed for
you by CHEELCARE.
Cross braces
Docking Module
12mm
(0.5”)
Screws
Locknuts
Mounting holes
