36
5.6. CONTRAST OF THE DISPLAY
Where there is insufficient readability of the display (display too dark or intensity of messages too weak), the appropriate contrast
of the display should be set.
How to set appropriate contrast
It is possible to adjust contrast in all positions of main switch.
STEP 1. Press SET key together with F3 to make the display darker or together with F2 to make the display brighter (keep the keys
pressed until the desired contrast is achieved)
K e ep pres s ed to gethe r to
m a ke d is pla y b righte st
K e ep pres s ed tog ether to
m a ke d is pla y d arkes t
Fig. 55. How to set appropriate contrast
NOTE !
The selected contrast may change due to a change in temperature of the display (instrument heat or changed ambient
temperature).
5.7. USE OF REMOTE CONTROL PEDAL
The pedal is intended to start and stop the measurement (in each function) as well as to save displayed results by foot. It is
advisable to use the pedal when both hands are occupied with test probes, or when tests are to be carried out away from the
instrument using longer test cables.
S TART /S TO P
IDENT
S AVE
GN D
In stru m e n t c o n n e cto r
(fem a le ) typ e M A B 6 1 00
D IN 4 5 3 2 2 (fro n t vie w )
SA
V
E
ST
A
R
T
/
ST
O
P
P ed a l s w itc h e s
1
2
3
4
5
2
1
3
5
fron t view
Fig. 56. Connection of remote control pedal to APPLIANCE MULTITESTER
NOTE !
The selected contrast may change due to a change in temperature of the display (instrument heat or changed ambient
temperature).
