27
Fig. 43. Main CE Link window
For more information on options in sequence editor see chapter 7, PC software - CE Link. When the sequence is completed it
must be sent to APPLIANCE MULTITESTER by using serial RS232 interface. After sending it, the PC does not need to be
connected to the APPLIANCE MULTITESTER.
How to carry out the measurement
STEP 1. Install CE Link PC software on your PC.
STEP 2. Using Sequence editor, create the desired sequence. Max. number of steps for each sequence is 50 including
programmed pause, messages, barcode reader sequence, sound signals etc.
Fig. 44. Sequence editor window
STEP 3. Set rotary switch on the instrument to AUTOTEST position, the heading in fig.45 is displayed.
Fig. 45. Main menu in Autotest function
(initially no program loaded)
