© Copyright Charge Amps AB
Doc. Nr: 130741-EN
Rev 01
Charge Amps
Frösundaleden 2B
SE-169 75 Solna
Sweden
www.chargeamps.com
Org. No. 556897-7192
Registered office: Solna
4
1.
Safety
WARNING! Read all instructions before use.
•
The product must only be installed by a qualified electrician in accordance with
the Installation Manual.
•
Make sure to switch the power off at the main switch before installation or
service.
•
Improper use and negligence to follow the instructions of this Installation Manual
may create a risk of personal injury.
•
Local rules and regulations for installation apply.
•
Only use this product for charging compatible electric vehicles.
•
Inspect the product for visible damage before use.
•
Never attempt to repair or use the product if it is damaged.
•
Make sure that the product is in good condition and that all cables are properly
seated before use.
•
Do not immerse the product in water, subject it to physical abuse or insert foreign
objects in any part of the product.
•
Always store the EV connector in the holder when not in use.
•
Never use an adapter between the EV connector and the electric vehicle.
•
Make sure to always wind up the EV charging cable while not in use to prevent
risk of damage to the cable and risk of tripping.
•
Make sure to unwind the EV charging cable before charging to avoid overheating
while in use.
•
Never attempt to disassemble the product in any way.
•
Make sure no flammable, explosive, corrosive or combustible materials,
chemicals, or fumes are nearby the mounting position.
•
Make sure that all terminal screws are securely fastened before reattaching the
front cover.
•
Be careful not to touch the circuit board during installation to prevent risk of static
electricity.
•
Heavy object! To avoid muscle strain or back injury, use lifting aids and proper
lifting techniques.
