3
WARNING:
BEFORE PERFORMING ANY REPAIR, MAINTENANCE, OR ASSEMBLY,
MAKE SURE THE THROWING ARM IS IN THE UNCOCKED POSITION (SEE BELOW),
THE ON/OFF/SAFE RELEASE SWITCH LOCATED ON THE REAR OF THE TRAP IS IN
THE „OFF„ POSITION (SEE PHOTO BELOW) , AND THE BATTERY IS DISCONNECTED
FROM THE TRAP.
If the throwing arm is in the cocked arm position (see photo below), uncock
the throwing arm by first connecting the red battery lead to the positive (+)
terminal and the black battery lead to the negative (-) terminal on the battery.
Momentarily press the on/off/safe release switch
to the “SAFE RELEASE”
position to release the throwing arm. After the trap fires, release the
ON/OFF/SAFE RELEASE
switch allowing it to return to the “OFF” position. The
throwing arm should now be in the uncocked position. Disconnect the battery
from the trap.
WARNING:
FAILURE TO FOLLOW SAFETY RULES CAN RESULT IN SERIOUS
INJURY OR DEATH!
Cocked Arm Position
(Ready to Launch Target)
Uncocked Arm Position
(Ready to Load Targets)
Circuit Breaker
ON/OFF/SAFE RELEASE
Switch
Drop Hole Open
Drop Hole
Partially Closed
2.5
” to 4.5“
more than
4.5
“
Flight Rail
