10
D. Attach the Throwing Arm Path Indicator
1. Attach A1 (Arm Path Tube Support) to each front side of trap using A4 (5mm x 10 Bolt) and
A5 (5mm Washer).
2. Thread A2 (Arm Path Tube Stud) into each rear tapped side hole of trap and tighten
securely.
3. Unwind A3 (Arm Path Tubing) and thread thru each A1 and connect each end to A2.
WARNING: FAILURE TO KEEP HANDS AND BODY OUTSIDE THE THROWING ARM
PATH INDICATOR AREA CAN RESULT IN SERIOUS INJURY OR DEATH
FROM BEING STRUCK BY THE THROWING ARM DURING USE.
Caution
:
Do not lift trap by throwing arm path tubing, or front arm path
tube supports, these were not designed to be a lifting point.
A1
A3
A2
A5
A4