![background image](http://html.mh-extra.com/html/champion/hc3/hc3_quick-start-manual_2588444041.webp)
40
Step 18
Base:
The TCP/IP Server screen will be displayed when the base
is ready to broadcast corrections. Note that the number of
rovers connected is 0 until 1 or more HC3’s connect.
Step 19
Base:
Snapshot of an actual incoming connection showing 1 rover
connected. The IP Address shown on YOUR screen is the IP
Address you used to configure YOUR HC3’s in step 7. You
are now ready to configure your HC3 rover(s).
Summary of Contents for HC3
