![background image](http://html.mh-extra.com/html/champion/hc3/hc3_quick-start-manual_2588444016.webp)
15
Select ‘Start-> Settings-> System-> Remove
Programs‘. Select the programs you wish to
remove in the list and click ‘OK’ to remove.
Select ‘Start-> Settings-> System-> Power->
Advanced’. Set the power off time in different
conditions. Backlight will be off according to
selected settings.
Select ’Start-> Settings-> System-> Clean
Boot’ to restore factory default settings
according to the guide.
Select ‘Start-> Settings-> System-> pwconfig’.
3.3. Removing Programs
3.4. Auto Power Off*
*NOTE
:
The device does not support the Auto Power Off
function, instead use Go-To-Sleep mode.
3.5. Clean Boot
*NOTE
:
The password is ‘1234’. Restoring factory settings
will clear the system configuration. Please be cautious.
3.6. PWConfig
*NOTE
:
While on “Screen Off” mode, the device won’t
hibernate.
Summary of Contents for HC3
