![background image](http://html.mh-extra.com/html/champion/hc3/hc3_quick-start-manual_2588444007.webp)
c)
Insert the battery according to the instructions on the
battery label.
d)
Close the back cover and turn the back cover screw
to the lock position.
2.2. Charging
a)
The USB cable is used to charge the internal battery.
It will charge while the unit is connected to a
PC, or you can use the included wall adapter or
any 5 volt cigarette lighter USB charging port.
2.3. Turning the Collector On/Off
a)
Make sure the battery has enough power, or connect
the HC3 to the AC adapter.
b)
Press the power button for 3~5 seconds to turn on.
c)
Press the power button for 3~5 seconds to power
off.
NOTE
: Use the tip of the stylus to press the reset key to
restart the HC3 if necessary.
6
Summary of Contents for HC3
