Challenge Titan 265, Instruction Manual

Page: 27 / 88

6.0 Operation
26
6.12 Maintenance Mode
The maintenance mode is an area where many machine functions can be set or modified. The four
principle functions are: Language, Parameters, Diagnostic, and Knife Adjust. To select a particular
function, use the up and down arrow keys to toggle to the desired function and press ENTER. See
the following descriptions for an explanation of each function.
6.12.1 Knife Adjust
The knife adjust function provides a way for the service technician to change the knife. In the Knife
Adjust screen, use the up and down arrow keys to toggle to the up or down status as desired, and
press ENTER. Close the front guard and press ENTER to send the knife to the desired position.
NOTE: To exit the knife down screen and return to the knife adjust screen, press the cut button.
6.12.2 Parameters
In the parameter screen, use the up and down arrow keys to toggle to the desired parameter, and
press ENTER. See the descriptions that follow for an explanation of each parameter.
6.12.2.1 False Clamp
The false clamp plate is an optional attachment, which reduces the creasing of paper caused by the
clamp. The disadvantage of using the false clamp plate is that it limits the smallest cut dimension.
The computer must know when the false clamp plate is installed on the machine to prevent
the backgauge from crashing into it.
In the false clamp screen, use the up and down arrow keys to
toggle between ON or OFF to indicate the presence of the false clamp plate, and press ENTER.
6.12.2.2 Time-out
The time-out parameter allows the operator to set the amount of idle time before the display and line
lights turn off. The choices are 2, 5, 10, 20, and 30 minutes. In the time-out screen, use the up and
down arrow keys to toggle to the desired time-out, and press ENTER.
6.12.2.3 Push-out
Normally, whenever the backgauge is sent to a larger dimension, a five-inch (127mm) push-out is
performed to aid the operator in accessing the paper. In some situations, it may be necessary to turn
this feature off. It is recommended that this feature be left on whenever possible. In the push-out
5.000
in
MAINT MENU
KNIFE ADJUST
PARAMETERS
DIAGNOSTIC
LANGUAGE
B) Job
C) Send
D) Exit