EASTMAN BLUE JAY-5H Instruction Manual & Illustrated Parts List Download Page 1

Page: 1 / 52

EASTMAN

THE EASTMAN

ELECTRIC LIFT
END CUTTER

BLUE JAY

Instruction Manual &

Illustrated Parts List

Please read completely before attempting
to operate your

BLUE JAY ELECTRIC LIFT.

Patent 5,193,728

779 Washington St., Buffalo, N.Y. 14203-1396 U.S.A. • (716)856-2200 • Fax (716)856-1140 or (716)856-2068

Manufacturers of Eastman Cloth Cutting and Cloth Spreading Machines

Website: www.EastmanCuts.com

WARNING

This machine is equipped with a very sharp
knife. Keep hands, arms, and hair away from
the knife area at all times.

Misuse of this machine or failure to follow all
safety instructions on this machine and in the
instruction manual may result in serious per-
sonal injuries.

Form CR-50-0433

Standard Configuration shown.

Summary of Contents for BLUE JAY-5H





















































Search results

Summary of Contents for BLUE JAY-5H

Reviews:

Related manuals for BLUE JAY-5H

Brands by name

Popular brands

EASTMAN BLUE JAY-5H, Instruction Manual & Illustrated Parts List

Search results

Summary of Contents for BLUE JAY-5H

Reviews:

Related manuals for BLUE JAY-5H

Brands by name

Popular brands