CHARTNAV 343
66
Nav Input Data
This option selects the format of the data being received by
Format the Chartnav 343 from your Navigator. The options
are:
NMEA 0183
NMEA 0182
KODEN 717
KODEN 757
FURUNO CIF
II-MORROW
NAVSTAR 2000D
Autopilot
This setting enables the Chartnav 343 to output information
to an autopilot, you must, however, ensure that your
autopilot is correctly configured to receive the data.
To allow the Chartnav to output data you must turn this
function on by selecting the data option most suited to the
autopilot from the options available:
OFF NMEA 0180/CDX
NMEA 0183 NMEA 0180
When one of these options is selected the setting is
automatically switched ON, to stop the autopilot data output
facility from functioning simply select the OFF option.
Route Following
This setting changes the way the Chartnav 343 will behave
when it reaches a Waypoint in a Route that it is following.
Manual: when the Waypoint is reached, the Chartnav gives an
alarm but does not change course. You must then select the
next Target Waypoint manually.
Automatic: when the Waypoint is reached, the Chartnav will
automatically make the next Waypoint in the route the Target
and change course to steer to it. The Waypoint Arrival Alarm
will warn that the Waypoint is approaching. Be cautious when
the end of the Route is reached because the Chartnav will
continue on its last heading until new instructions are given to
it.
The method by which the Chartnav determines that a
Waypoint has been reached is either:
All manuals and user guides at all-guides.com
all-guides.com
