CET PMC-690, User Manual

Page: 97 / 103

CET Electric Technology
97
Appendix B - Event Classification
Device Event Classification
Event
Classification
Sub-
Classification
Description Value Scale/Option
1=System
0 Power On None
1 Power Off None
2 Change System Parameters None
3 Change Secret Parameters None
4 Set Clock
0= Set Clock via Front Panel
1= Set Clock via Communication
5 Reserved
6 Restore Factory Defaults None
7 Format Device
8 Clear System Parameters None
9 Clear Secret Parameters None
10 Clear Device Log None
11~33 Reserved
34 Hardware Alarm
Device self-test PPC
Device self-test DSP
35 Hardware is working normally None
36~38 Reserved None
39 Format SD Card None
40 Uninstallation SD Card None
41 Start Monitoring None
42 Stop Monitoring None
43 Add a Site
44 Rename a Site
45 Switch Sites
46 Switch Record
47 Delete Record
2=Standard
Setpoint
0 Over Setpoint Active
UINT32: Setpoint Parameters
FP32: The Setpoint Active/ Inactive
limit (be consistent with real-time-
limit)
UINT32: Setpoint #X (0-23)
1 Over Setpoint Return
UINT32: Setpoint Parameters
FP32: The Setpoint Active/ Inactive
limit (be consistent with real-time-
limit)
UINT32: Setpoint #X (0-23)
FP32: Max. during Setpoint
UINT32: Duration
128 Under Setpoint Active See Over Setpoint Active
129 Under Setpoint Return See Over Setpoint Return
3=HS
Setpoint
0 Over Setpoint Active
UINT32: Setpoint Parameters
FP32: The Setpoint Active/ Inactive
limit (be consistent with real-time-
limit)
UINT32: Setpoint #X (0-15)
1 Over Setpoint Return
UINT32: Setpoint Parameters
FP32: The Setpoint Active/ Inactive
limit (be consistent with real-time-
limit)
UINT32: Setpoint #X (0-15)
FP32: Max. during Setpoint
UINT32: Duration
128 Under Setpoint Active See Over Setpoint Active
129 Under Setpoint Return See Over Setpoint Return
5=WFR
0 WFR Triggered by RMS Change
UNIT32: 0~7=Sub RMS Change
Event Number
1 WFR Triggered by Dip/Swell
None
2 WFR Triggered by Transient
3 WFR Triggered by Standard Setpoint UNIT32: Standard Setpoint Number