CET PMC-690, User Manual

Page: 52 / 103

CET Electric Technology
52
0078 RO Plt Timestamp - Millisecond UINT32 ms
0080 RO Flagging Status of Real-time Data 2 Bitmap
0081~0092 Reserved
0093 RO Standard Setpoint Status 3 Bitmap
0095~0109 RO Reserved Bitmap
0111 RO HS Setpoint Status 3 Bitmap
0113 Reserved
0115 RO Dips Counter UINT32
0117 RO Swells Counter UINT32
0119 RO Interruption Counter UINT32
0121 RO Transient Counter UINT32
0123 RO RVC Counter UINT32
0125 RO Inrush Current Counter UINT32
0127 RO RMS Change Counter UINT32
0129 RO MSV (Mains Signalling Voltage) #1 Counter UINT32
0131 RO MSV #2 Counter UINT32
0133 RO MSV #3 Counter UINT32
0135 RO Total PQ Event UINT32
0137 RO Device Log Pointer UINT32
0139 RO SOE Log Pointer UINT32
0141 RO WFR Log Pointer UINT32
0143 RO RMS Log Pointer UINT32
0145 RO Disturbance Recorder Pointer UINT32
0147~0157 Reserved
0159 RO SDR #1 Pointer UINT32
0161 RO SDR #2 Pointer UINT32
0163 RO SDR #3 Pointer UINT32
0165 RO SDR #4 Pointer UINT32
0167 RO SDR #5 Pointer UINT32
0169~0237 Reserved
0239 RO Pst Log Pointer UINT32
0241 RO Plt Log Pointer UINT32
0243 Reserved
0245 RO Reserved
0247 RO EN50160 Pointer UINT32
0249 RO Qualification Rate Pointer (Reserved for English Version) UINT32
0251 RO Reserved UINT32
Table 5-1 Basic Measurements
Notes:
1) When the Wiring Mode is Delta , the per phase line-to-neutral voltages, kWs, kvars, kVAs and P.F.s have no meaning, and
their registers are reserved.
2) Please refer to Section 4.3.13 Flagging Concept for a detailed description of the Flagging Status register.
Bit Description Bit Description
B0
Basic Measurement
Dip B8
Pst.
Dip
B1 Swell B9 Swell
B2 Interruption B10 Interruption
B3 Over Current Limit* B11 Reserved
B4
Freq.
Dip B12
Plt.
Dip
B5 Swell B13 Swell
B6 Interruption B14 Interruption
B7 Reserved B15 Reserved
* 2x I
Normal
Table 5-2 Flagging Status
3) The Standard Setpoint Status register represent the states of Standard Setpoints #1 to #24 while the HS Setpoint Status
register represents the states of HS Setpoints #1 to #16, with a bit value of 1 meaning active and 0 meaning inactive.
Bit B0 B1 B2 … B23 B24~B31
Standard Setpoint Setpoint #1 Setpoint #2 Setpoint #3 … Setpoint #24 Reserved
Table 5-3 Standard Setpoint Status #1 (0093)
Bit B0 B1 B2 … B15 B16~B31
HS Setpoint HS Setpoint #1 HS Setpoint #2 HS Setpoint #3 … HS Setpoint #16 Reserved
Table 5-4 High-speed Setpoint Status (0111)
4) The range of the Device / SOE Log Pointer is between 0 and 0xFFFFFFFF. The Device / SOE Log Pointer is incremented by