CET PMC-690, User Manual

Page: 85 / 103

CET Electric Technology
85
BIT0: SDR Log
BIT1: Max. Log
BIT2: Min. Log
BIT3: EN50160
Others: Reserved
40826~40833 RW FTP User name char
40834~40841 RW FTP Password char
40842 RW Login FTP with Anonymous uint16 0= Enabled, 1= Disabled 0
40843 RW FTP Visible uint16 0= Enabled, 1= Disabled 0
40844 RW TELNET Visible uint16 0= Enabled, 1= Disabled 0
Table 5-65 System Setup Parameters
Notes:
1) The following table lists the Codes for different Time Zones.
Code Time Zone Code Time Zone Code Time Zone
0 GMT-12:00 11 GMT-2:00 22 GMT+5:45
1 GMT-11:00 12 GMT-1:00 23 GMT+6:00
2 GMT-10:00 13 GMT-0:00 24 GMT+6:30
3 GMT-9:00 14 GMT+1:00 25 GMT+7:00
4 GMT-8:00 15 GMT+2:00 26 GMT+8:00
5 GMT-7:00 16 GMT+3:00 27 GMT+9:00
6 GMT-6:00 17 GMT+3:30 28 GMT+9:30
7 GMT-5:00 18 GMT+4:00 29 GMT+10:00
8 GMT-4:00 19 GMT+4:30 30 GMT+11:00
9 GMT-3:30 20 GMT+5:00 31 GMT+12:00
10 GMT-3:00 21 GMT+5:30 32 GMT+13:00
Table 5-66 Time Zones
2) The timestamp of historical data is programmable which is illustrates below:
0: local time
1: UTC time
BIT Description Note
BIT0 MODBUS
Timestamp of retrived Data log via Modbus: Real-time measurement, Device/PQLOG,
SDR, Real-time measurements, Max./Min. log, Plt/Pst
BIT1 COMTRADE Timestamp of COMTRADE file and the first/trigger point in .cfg file
BIT2 PQDIF Timestamp of PQDIF file, file name and store directory.
Table 5-67 Timestamp of Historical Data
3) 0 means the DWR file doesn’t involve sampling section information.
5.9 Time Registers
There are two sets of Time registers supported by the PMC-690 - Year / Month / Day / Hour / Minute /
Second (Registers # 60000 to 60002 for 6-digit addressing and Registers # 9000 to 9002 for 5-digit
addressing) and UNIX Time (Registers # 60004 to 600005 for 6-digit addressing and Registers # 9004 to
9005 for 5-digit addressing). When sending time to the PMC-690 over Modbus communications, care
should be taken to only write one of the two Time register sets. All registers within a Time register set
must be written in a single transaction. If registers 60000 to 60004 (or 9000 to 9004 for 5-digit
addressing) are being written to at the same time, both Time register sets will be updated to reflect the
new time specified in the UNIX Time register set 60004 (9004) where the time specified in registers
60000 to 60003 (9000-9003 for 5-digit addressing) will be ignored. Writing to the Millisecond register
60003 (9003 for 5-digit addressing) is optional during a Time Set operation. When broadcasting time,
the function code must be set to 0x10 (Pre-set Multiple Registers). Incorrect date or time values will be
rejected by the meter.
Register
Property Description Format Note
6-digit 5-digit
60000 9000 RW
High-order Byte: Year
UINT16
0-37 (Year-2000)
Low-order Byte: Month 1 to 12