Fitting
Page 80 of 128
OMEGA ACTIVE IES
7.
Fig. 103 - Tighten the screw of the
handle
Tighten the
hexagon socket
head screw of the
handle of the
inside shield with
the 3 mm hexagon
socket head key.
Now make the bore holes in the door for the mounting and the
push bar:
8.
Fig. 104 - Place the drilling
template
Place the supplied
drilling template over
the spindle.
Align the template
accurately.
Ensure parallel
alignment of the
measuring scale on
the template.
9.
Fig. 105 - Mark the holes
Mark the holes for the
fixing screws with an
awl on both sides of
the door.
Now transfer the
dimensions for the
push bar bore holes.
