Fitting
Page 82 of 128
OMEGA ACTIVE IES
11.
Fig. 108 - Drill the marked holes
Drill the marked holes
for the fixing screws
with a power drill.
Drill from both sides
so that the drill does
not run off centre.
Remove all chips.
12.
Fig. 109 - Fit the lock
If the lock had been
removed, fit it again.
13.
Fig. 110 – Insert the locking
cylinder
Optional fitting step:
Insert the locking
cylinder into the lock.
Fix the locking
cylinder loosely with
the cylinder fixing
screw so as to just
prevent slipping.
Do not yet tighten the
cylinder fixing screw
at this point.
