Replacing the batteries of the IES
Page 98 of 128
OMEGA ACTIVE IES
NOTICE
Risk of damage to the IES.
Replace batteries within one hour.
Make sure the Low Battery alarm, even after the
battery change.
If so, repeat the battery change.
When the battery is replaced, the programming data
remain stored in the memory of the IES. The battery
should be replaced within 60 seconds as otherwise
the time of day of the IES must be reset.
In RF mode, you do not have to re-set the time of
day, as the current time is continously transmitted by
the OMEGA ACTIVE server.
Please refer to the Operating Instructions for the
CP100 programmer on how to set the time of day
with the programmer.
NOTICE
Incorrectly inserted batteries may cause
irreparable damage to your IES.
Only use batteries of the ER14505M type with
3.6 V, 2.2 Ah, lithium, size AA.
Always insert the batteries with the correct
polarity into your IES.
If a battery of the wrong type or polarity has
been inserted, have your IES checked by a
CEStronics partner.
