LOST OR FORGOTTEN USER CODES
LOSS OF PRIMARY USER CODE
If the
3-8 digit
Primary user code is lost or forgotten you can enter a new
3-8 digit
Primary
user code by opening the safe with the
3-8 digit
secondary user code and using red reset
button located on the inside edge of the door.
Once the safe is open follow the instruction on how to “
REPROGRAM A NEW PRIMARY
USER CODE
” located at the bottom of page 1
LOSS OF SECONDARY USER CODE
If the
3-8 digit
Secondary user code is lost or forgotten you will not be able to reprogram a
new Secondary user code.
You will be able to continue using the safe with the
3-8 digit
Primary user code but will lose
the ability to have a Secondary user code.
IMPORTANT
: To avoid losing the ability to continue using a Secondary user code it is very
important that the
3-8 digit
Secondary user code is recorded when it is programmed and
kept in a secure location away from the safe.
LOSS OF BOTH PRIMARY AND SECONDARY USER CODES
If both the Primary user code and Secondary user codes are lost, you may open the safe
using the Emergency Override Access key and use the red user code reset button to
reprogram the
3-8 digit
Primary user code.
The instructions for opening the safe with the Emergency Override Access key are below.
OVERRIDE ACCESS KEY
Your safe is equipped with an emergency override access key lock which allows immediate
access in case you forget your User codes or the batteries need replacing.
1.
To access the compartment, locate the
tab at the top of the keypad.
2.
Place your hand on the keypad tab and
pull forward.
3.
With the tab pulled forward, rotate the
keypad counterclockwise to the left and
pull keypad out.
4.
Insert the override key into the keyhole
on the inside of the lock and turn the key
to the right to unlock the safe.
5.
Once the safe is opened, position the
keypad back onto the mounted bracket
and rotate clockwise to the right to lock
in place.
1.
2.
3.
4.
SECURE LOCKOUT PERIOD
If the wrong user code is entered into the keypad 4 consecutive times in a row, the keypad
will automatically revert to the lockout mode and you will not be able to open the safe using
the digital keypad for 3 minutes. During the lockout period entry can be made using the
emergency override key. Continued entry of the wrong user code will cause additional 3
minute lockouts until the proper user code is entered.
3
ATTENTION!
This Honeywell Executive Safe includes a new
Dual User Code Digital Lock. This update replaces
the User Code Programming Instructions located
on Page 3 of the Owner’s Manual for Executive
Safe Models 3014D, 3018D, 3024D, 3032D,
3114D, 3118D, 3124D, 3132D, 3310D, 3330D,
3350D, 3410D, 3430D, & 3450D
DUAL USER CODE DIGITAL LOCK
PRIMARY & SECONDARY USER CODE
PROGRAMMING INSTRUCTIONS
IMPORTANT UPDATE!
