Fitting
Page 32 of 128
OMEGA ACTIVE IES
Before being fitted, the IES must partly be disassembled.
The following tools are required for the fitting:
the tools supplied with the IES
the drilling template supplied with the IES
cross-tip screwdriver with appropriate bits
awl for marking (Only for fitting the basic version)
power drill with appropriate drill bits (Only for fitting the
basic version)
profile cylinder bitting gauge (multi-function key).
NOTICE
The electronic components of the IES may
be damaged.
Do not disassemble the IES in rooms with
a high built-up static charge.
Always use an ESD grounding bracelet
during fitting and maintenance work so as
to establish potential equalization.
Do not store the locking cylinder without
inserting a charged battery.
Do not remove the ESD cover of the
electronic unit.
NOTICE
The IES may be damaged if not fitted
properly.
Only skilled personnel may fit the IES.
This personnel must have been trained on
the product by CEStronics or a CEStronics
partner.