Fitting
Page 72 of 128
OMEGA ACTIVE IES
19.
Fig. 88 - Fasten the inside shield
Push the inside plate
with the electronics
module onto the
square.
Fasten the inside
shield with the two
M5 x 6 mm fastening
screws.
Be sure not to
squeeze or damage
the cable.
20.
Fig. 89 - Guide the cable
Guide the cable (1)
below the holder of
the inside handle
upward to the plug
connector.
Be sure not to
damage or squeeze
the cable.
NOTICE
If the ESD cover (3) is removed, this may
cause malfunctions of and/or damage to
the IES.
Do not remove the ESD cover of the electronic
unit (3).
