SOLOY TURBINE PAC
SECTION 7
POHS CESSNA U/TU 206G
AIRPLANE & SYSTEMS
DESCRIPTION
7-25
F.A.A. Approved
October 4, 2005
NOTE
Using the test function while engine is running
causes the computer to lose 13 seconds of
fuel count.
B. Time remaining shows no display at the upper display
window. Pres “Lbs. Used” button –
upper window will
display lb. used since last reset.
C. Press ”Lb. Rem.” button – upper window will display lb.
of fuel remaining on board. Pilot should confirm this
figure with actual fuel on board
D. Fuel temperature will be displayed in the lower right
side display window in degrees F.
2. If no extra fuel is needed for the trip:
A. No action is needed since data is already stored.
B. Upon starting the engine, the computer will display fuel
flow, time remaining and the other two functions are
available by pressing the appropriate buttons.
3
.
Tanks Full
A. Press “Lb. Rem.” button and hold.
B. Press “Test/Enter” button to increment the fuel quantity
(the longer you press the faster the incrementing) until
the total usable lb. of fuel is reached..
C. Release “Test/Enter” and the total usable fuel on board
is entered into the memory.
D. If an error has occurred by exceeding the correct total
usable fuel, press the “Lb. Used” button and
simultaneously press “Enter/Test” button. Lb. used will
be reset and the fuel remaining will be displayed for 4
seconds. The figures will decrement (the longer you
press, the faster the decrementing) until reaching the
correct figure.
UNCONTROLLED
COPY
