© Cesab
3 – 1
T Code(s): 841, 842, 843
Repair manual: General safety rules
Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040
Date: 2018-05-01
Applies from serial number: 6384351-
3. General safety rules
Only personnel trained in servicing and repair of this type of truck are
authorised to carry out service and repair activities.
3.1 Work safety
To make work safer and prevent accidents, always keep the following in
mind:
•
Keep the maintenance work site clean. Oil and water on the floor will make
it slippery.
•
Use the correct working posture. Service work often involves sitting on
your knees or bending over forwards. Try sitting on a toolbox, for example,
to relieve the strain on your knees and back.
•
Loose items and jewellery can get caught in moving parts of the truck. So
never wear loose articles or jewellery while working on the truck.
•
Exercise caution and always follow applicable local regulations when
working at high heights.
•
Use the correct tools for the work you are carrying out.
•
Keep all tools well maintained.
•
Make sure that all safety equipment including guards and covers are
properly secured and that they work as intended before starting the repair
work. If a guard or cover must be removed in order to perform the repair
work, extra care must be taken, and when the repair work is finished the
guard or cover must be refitted.
•
Relieve the system pressure slowly before starting work on the truck’s
hydraulic system.
•
Use paper or a stiff piece of cardboard when checking for possible oil
leaks. Do not use your hands.
•
Drive unit oil and the hydraulic system oil may be hot.
DANGER!
Risk of burn injury.
Hot drive unit and hydraulic oil.
Allow the truck to cool down before changing the oil.
•
Only fill the hydraulic system with new and clean oil.
https://www.forkliftpdfmanuals.com/
