© Cesab
8 – 10
T Code(s): 841, 842, 843
Repair manual: Troubleshooting
Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040
Date: 2018-05-01
Applies from serial number: 6384351-
2:102
Configuration error.
Truck configuration
does not match
parameter 1102
Creep speed,
blocked lifting/
lowering
movement
Incorrect value for
parameter 1102
1:
Check parameters
•
Check that factory parameters
are set according to the truck
configuration.
•
Check that other parameters
are set correctly.
2:180
Internal program
error
Creep speed,
blocked lifting/
lowering
movement
Internal program
error
•
Create a truck report. Send a
report to the manufacturer.
•
Update the truck software to the
latest version.
2:285
Incorrect signal
combination from
the support arm
position sensor
Creep speed,
blocked lifting/
lowering
movement
1:
High
signal
from both B62
and B65
2:
Constantly
high signal at
inputs (T1:94)
and (T1:87)
1:
Check the sensor signal
•
Check that the distance
between the sensor and the
opposite part is correct.
•
Check that there is no dirt or
foreign objects on the sensor
•
Inspect cabling.
•
Measure the signals from the
sensor with a volt meter and
verify using TruckCom or the
built-in test that the signal is
correct
2:
Check the signal to the unit
•
Compare the signals from the
sensor with the input signal (use
a volt meter and verify using
TruckCom or the built-in test
that the signals are the same)
•
Check the pins on the unit and in
the connector
•
Replace the unit if you cannot
get it to work properly
Code
Description
Truck
behaviour
Error cause(s)
Procedure
https://www.forkliftpdfmanuals.com/
