Cerus Industrial Titan CI-001-GS2, Installation, Operation & Maintenance Manual

Page: 88 / 178

9-17
9.5 V/F control
z
Linear V/F pattern operation
Group Code Parameter Name Setting Range Initial Unit
Function group 1 F22
[Base frequency]
- 30 ~ 400 60.00 Hz
F23
[Start frequency]
- 0.1 ~ 10.0 0.50 Hz
F30 [V/F pattern] 0
0 ~ 2 0
Function group 2 H40 [Control mode select] - 0 ~ 3 0
ƒ
Set F30 to 0 {Linear}.
ƒ
This pattern maintains a linear Volts/frequency ratio from F23 - [Start frequency] to F22-
[Base frequency]. This is appropriate for constant torque applications.
Base Frequency: Inverter outputs its rated voltage at this level. Enter the motor
nameplate frequency.
Start Frequency: Inverter starts to output its voltage at this level.
z
Square V/F pattern
Group Code Parameter Name Setting Range Initial Unit
Function
group 1
F30 [V/F pattern] 1
0 ~ 2 0
ƒ
Set F30 to 1{Square}.
ƒ
This pattern maintains squared volts/hertz ratio. Appropriate applications are fans, pumps,
etc.
Run
command
Freq.
Start freq.
Base freq.
Voltage
Inverter rated
voltage
Freq.
Base freq.
100%
Voltage