Cerus Industrial Titan CI-001-GS2, Installation, Operation & Maintenance Manual

Page: 142 / 178

13-1
CHAPTER 13 - RS485 COMMUNICATION
13.1 Introduction
Inverter can be controlled and monitored by the sequence program of the PLC or other master
module.
Drives or other slave devices may be connected in a multi-drop fashion on the RS-485 network and
may be monitored or controlled by a single PLC or PC. Parameter setting and change are available
through PC.
13.1.1 Features
Inverter can be easily applied for factory automation because operation and monitoring is available
by User-program.
* Parameter change and monitoring is available via computer.
(Ex: Accel/Decel time, Freq. Command etc.)
* Interface type of RS485 reference:
1) Allows the drive to communicate with any other computers.
2) Allows connection of up to 31 drives with multi-drop link system.
3) Noise-resistant interface.
Users can use any kind of RS232-485 converters. The specifications of converters depend on the
manufacturers. Refer to the converter manual for detailed specifications.
13.1.2 Before installation
Before installation and operation, this should be read thoroughly. If not, it can cause personal injury
or damage to other equipment.
13.2 Specification
13.2.1 Performance specification
Item Specification
Communication
method
RS485
Transmission form Bus method, Multi drop Link System
Applicable inverter GS series
Converter RS232 converter
Connectable drives Max 31
Transmission distance Max. 1,200m (Within 700m Recommend)