Cerus Industrial Titan CI-001-GS2, Installation, Operation & Maintenance Manual

Page: 72 / 178

9-1
CHAPTER 9 - BASIC FUNCTIONS
9.1 Frequency mode
z
Keypad Frequency setting 1
Group Code Parameter Name Setting Range Initial Unit
Drive group 0.00 [Frequency Command] - 0 ~ 400 0.00 Hz
Frq [Frequency mode] 0
0 ~ 7 0
ƒ
Set Frq – [Frequency mode] to 0 {Frequency setting via Keypad 1}.
ƒ
Set the desired frequency in 0.00 and press the Prog/Ent (
z
) key to enter the value into
memory.
ƒ
The value is settable less than
F21
– [Max frequency].
When remote keypad is connected, keypad keys on the body are deactivated.
z
Keypad Frequency setting 2
Group Code Parameter Name Setting Range Initial Unit
Drive group 0.00 [Frequency Command] - 0 ~ 400 0.00 Hz
Frq [Frequency mode] 1
0 ~ 7 0
ƒ
Set
Frq
– [Frequency mode] to 1{Frequency setting via Keypad 2}.
ƒ
In
0.00
, frequency is changed upon pressing the Up (
S
)/Down (
T
) key. In this case,
UP/Down keys serve as a potentiometer.
ƒ
The value is settable less than F21 – [Max frequency].
When remote keypad is connected, keypad keys on the body are deactivated.