Cerus Industrial Titan CI-001-GS2, Installation, Operation & Maintenance Manual

Page: 151 / 178

13-10
Address Parameter Scale Unit R/W Data value
BIT 4: P5
BIT 5: P6
BIT 6: P7
0x0010 Input terminal status
BIT 7: P8
BIT 0~3: Not Used
BIT 4: MO (Multi-Output with OC)
BIT 5~6: Not Used
0x0011 Output terminal status R
BIT 7: 30AC
0x0012 V1 0~3FF R Value corresponding to 0V ~ +10V
0x0013 V2 0~3FF R
Value corresponding to 0V ~ -10V input when
Setting FreqMode to 2
0x0014 I 0~3FF R Value corresponding to 0 ~ 20mA input
0x0015 RPM R See Function List.
0x001A Unit display R Not Used
0x001B Pole number
R
Not Used
0x001C Custom Version
R
Not Used
BIT 0: COM (I/O Board Reset)
BIT 1: FLTL
BIT 2: NTC
BIT 3: REEP
0x001D Trip information-B R
BIT 4~15: Not Used
Note 1) Detail description on Common area address 0x0006
Bit Value R/W Name Description
0 0x01 R/W Stop Stop command via communication (0->1)
1 0x02 R/W Forward run Forward run command via communication (0->1)
2 0x04 R/W Reverse run Reverse run command via communication (0->1)
3 0x08 W Fault reset Fault reset command via communication (0->1)
4 0x10 W
Emergency
stop
Emergency stop command via communication (0->1)
5,15 - Not used Not Used
6~7 R
Operating
command
0(Terminal), 1(keypad), 2(option), 3(Int. 485)
A. When operating command is issued via Terminal, Keypad
or Option
0:DRV-00 1:Not used 2:Multi-speed 1 3: Multi-speed 2
4: Multi-speed 3 5: Multi-speed 4 6: Multi-speed 5
7: Multi-speed 6 8: Multi-speed 7 9:Up 10:Down
11:Up/Down Zero 12:V0 13:V1 14:I 15: V0+I 16: V1+I 17:
Jog
8~14 R
Frequency
command
18: PID 19: Communication 20 ~ 31: Reserved