Cerus Industrial Titan CI-001-GS2, Installation, Operation & Maintenance Manual

Page: 130 / 178

11-11
z
12: During operation
Activated when run command is input and inverter outputs its voltage.
z
13: During stop
Activated during stop without active command.
z
14: during constant run
Activated during constant speed operation.
z
15: During speed searching
Refer to page 10-13.
z
16: Wait time for run signal input
This function becomes active during normal operation and that the inverter
waits for active run command from external sequence.
z
17: Fault output
The parameter set in I56 is activated.
For example, if setting I55, I56 to 17 and 2, respectively, Multi-function
output relay will become active when trip other than “Low voltage trip”
occurred.
z
18: Cooling fan trip alarm
Used to output alarm signal when H78 is set to 0(constant operation at
cooling fan trip). Refer to page 10-21 .
m™Œ˜U
tv
yϥG
Š–””ˆ•‹
m™Œ˜U
tv
yϥG
Š–””ˆ•‹
m™Œ˜U
tv
yϥG
Š–””ˆ•‹