Certikin COH110 Operating, Installation And Servicing Instruction Download Page 57

Page: 57 / 96

1/07/02

4:3 INSTALLATION WIRING

The designs below are in order of preference, the CCP02 being the easiest, quickest and most comprehen-
sive solution.

Certikin Mk2 Oil Pool Heater

T.S

DESIGN

NOTES

Takes full advantage of all the features of the Certikin

Oil Pool Heater.

Pool Pump control providing overrun and Frost Protection action.

Provides the fastest installation

Optional connections for Lights and Space Heating all provided.

Takes full advantage of all the features of the Certikin

Oil Pool Heater. Considerable installation time.

Pool Pump control providing overrun and Frost Protection action.

Optional Space Heating only available with more wiring.

Limited application of Certikin Oil Pool Heater.

Moderate installation time.

No Pool Pump control, Overrun or Frost Protection action.

Non-preferred application of Certikin Oil Pool Heater.

Moderate installation time.

No Pool Pump control, overrun or Frost Protection action.

Optional Lighting only available with more wiring.

Optional Space Heating only available with more wiring.

Optional Lighting only available with more wiring.

Utilising the CCP02 "Quick Fit" Oil Pool Heater Control

Optional Space Heating only available with more wiring.

Optional Lighting only available with more wiring.

T.S = Time switch

HTR = Oil Heater

CCP02

IMPORTANT: Remove link, Live to Pool Demand, in Heater

OR, Certikin Condensing 100 Pool Heater

OR, Certikin Condensing 100 Plus, Pool Heater

Lights

Up to 6A

Up to 16A

Pool Pump

LNE

Trip

> HTR

Permanent Live

> HTR

Pool Demand

< HTR

Pool Pump

RELAY

Rated to

suit pump

More than 3A

Up to 3A

Trip

> HTR

Permanent Live

> HTR

Pool Demand

Pool Pump

Trip

> HTR

Permanent Live

> HTR

Pool Demand

Pool Pump

Summary of Contents for COH110

































































































Search results

Summary of Contents for COH110

Reviews:

Related manuals for COH110

Brands by name

Popular brands

Certikin COH110, Operating, Installation And Servicing Instruction

Search results

Summary of Contents for COH110

Reviews:

Related manuals for COH110

Brands by name

Popular brands