MIB Parameters
Appendix D
FA4800 User Manual
Release 1.9.30
D-6
MIB Parameters
Table D-2: Private MIB Parameters (Sheet 1 of 17)
Name
OID
Type
Ac
ces
s
Description
fibeAir4800OduAdmProductType
1.3.6.1.4.1.4458.1000.1.1.1
DisplayString
RO
ODU configuration description.
fibeAir4800OduAdmHwRev
1.3.6.1.4.1.4458.1000.1.1.2
DisplayString
RO
ODU Hardware Version.
fibeAir4800OduAdmSwRev
1.3.6.1.4.1.4458.1000.1.1.3
DisplayString
RO
ODU Software Version.
fibeAir4800OduAdmLinkName
1.3.6.1.4.1.4458.1000.1.1.4
DisplayString
RW Link Name. A change is effective immediately.
fibeAir4800OduAdmResetCmd
1.3.6.1.4.1.4458.1000.1.1.5
Integer
RW Reset Command. A set command with a value of 3
will cause a device reset. The read value is
always 0.
fibeAir4800OduAdmAddres
1.3.6.1.4.1.4458.1000.1.1.6
IpAddress
RW ODU IP address. A change is effective after reset.
The parameter is kept for backward compatibility.
Using the alternative parameter:
fibeAir4800OduAdmIpParamsCnfg is
recommended.
fibeAir4800OduAdmMask
1.3.6.1.4.1.4458.1000.1.1.7
IpAddress
RW ODU Subnet Mask. A change is effective after
reset. The parameter is kept for backward
compatibility. Using the alternative parameter:
fibeAir4800OduAdmIpParamsCnfg is
recommended.
fibeAir4800OduAdmGateway
1.3.6.1.4.1.4458.1000.1.1.8
IpAddress
RW ODU default gateway. A change is effective after
reset. The parameter is kept for backward
compatibility. Using the alternative parameter:
fibeAir4800OduAdmIpParamsCnfg is
recommended.
fibeAir4800OduAdmBroadcast
1.3.6.1.4.1.4458.1000.1.1.10
Integer
RW This parameter is reserved for the Manager
application provided with the product.
fibeAir4800OduAdmHostsTable
N/A Trap destinations table. Each trap destination is
defined by an IP address and a UDP port. Up to
10 addresses can be configured.
fibeAir4800OduAdmHostsEntry
N/A Trap destinations table entry. INDEX {
fibeAir4800OduAdmHostsIndex }
fibeAir4800OduAdmHostsIndex
RO
Trap destinations table index.
fibeAir4800OduAdmHostsIp
1.3.6.1.4.1.4458.1000.1.1.12.1.2
IpAddress
RW Trap destination IP address. A change is effective
immediately.
fibeAir4800OduAdmHostsPort
1.3.6.1.4.1.4458.1000.1.1.12.1.3
Integer
RW UDP port of the trap destination. A change is
effective immediately.
fibeAir4800OduBuzzerAdminState
1.3.6.1.4.1.4458.1000.1.1.13
Integer
RW This parameter controls the activation of the
buzzer while the unit is in install mode. A change
is effective immediately. The valid values are:
disabled (0) enabledAuto (1)
enabledConstantly(2).
fibeAir4800OduProductId
1.3.6.1.4.1.4458.1000.1.1.14
DisplayString
RO
This parameter is reserved for the Manager
application provided with the product.
fibeAir4800OduReadCommunity
1.3.6.1.4.1.4458.1000.1.1.15
DisplayString
RW Read Community String. This parameter always
returns ***** when retrieving its value. It is used
by the Manager application to change the Read
Community String. The SNMP agent accepts only
encrypted values.
fibeAir4800OduReadWriteCommunity
1.3.6.1.4.1.4458.1000.1.1.16
DisplayString
RW Read/Write Community String. This parameter
always returns ***** when retrieving its value. It is
used by the Manager application to change the
Read/Write Community String. The SNMP agent
accepts only encrypted values.
fibeAir4800OduTrapCommunity
1.3.6.1.4.1.4458.1000.1.1.17
DisplayString
RW Trap Community String. This parameter is used by
the Manager application to change the Trap
Community String. The SNMP agent accepts only
encrypted values.
