Centrometal BioTec Plus 25 Technical Instructions Download Page 126

Page: 126 / 130

WOOD PELLETS FIRING WARNINGS:

WARNING

NAME

DESCRIPTION

Boiler status:

Boiler will be work for a while, if pellet tank

don’t be reﬁlled with pellets will be shown „E22 Fuel level”
what’s mean that is no enough fuel for continue of boiler
work.

Possible causes:

Low fuel level in pellet tank, enough for

short time.

Wp13

Fuel level

Upper boiler door are opened (wood side) during burner
work (wood pellet side), if time counter expire then will be
showned error Ep46.

Wp15

Upper door opened -
wood side

Too high ﬂue gas temperature with the open upper boiler
door. Close the uper door and restart the boiler (load fuel if is
necessary).

No fuel.

Ww9

Ww11

Fan is OFF, ﬂue gas
temperature is to high.
Close the upper door!

Out of fuel

Warning list

Technical instructions

BioTec Plus

126

Summary of Contents for BioTec Plus 25



































































































































Search results

Summary of Contents for BioTec Plus 25

Reviews:

Centrometal BioTec Plus 25, Technical Instructions, Page: 126 / 130

Search results

Summary of Contents for BioTec Plus 25

Reviews: