manualshive.com logo in svg

Centrometal BioTec Plus 25, Technical Instructions, Page: 108 / 130

Share
Download
Centrometal BioTec Plus 25 Technical Instructions Download Page 108

Cleaning / maintenance interval

Boiler power

Description

At least once per year

25, 35 and 45 kW

Cleaning the blades and box of

the fan

1. Switch off the boiler and disconnect from electric. power.
2. Unscrew nuts (A) shown in Image 1.
3. Relase screws (B) shown in Image 2.
4. Pull out fan with flange to the end od rail, then open it to left side (see Image 2. and Image 3.).

BioTec Plus 25, 35

BioTec Plus 45

1. Switch off the boiler and disconnect from electric. power.
2. Unscrew nuts (A) shown in Image 1.
3. Relase screws (B) shown in Image 2.
4. Pull out fan with flange to the end od rail, then open it to left side (see Image 2. and Image 3.).

Before this procedure be sure to disconnect boiler from electric. power!

1.

2.

3.

1.

2.

3.

Cleaning and maintenance of the boiler

Technical instructions

 BioTec Plus

108

Summary of Contents for BioTec Plus 25



































































































































Reviews:

No comments