Page 3
SKU 95112
for technical questions, please call 1-800-444-3353.
product specifications
Electrical Requirements
220 VAC / 60 Hz / 18 Amps
3 HP Motor / Single Phase / 3450 RPM
Power Switch Type: Push Button (Magnetic ON/OFF)
Required Power Plug Type: 3-Prong, 220 VAC, Polarized, Twist-Lock (Not
Included)
Required Saw Blade
10” Diameter with 5/8” Arbor Hole rated at 4150 RPM or greater (Not Included)
Maximum Blade Height
3”
Arbor Size
5/8” Diameter
Cutting Capacity
3” @ 90° / 2-1/8” @ 45°
Maximum Rip to Right
50” (Table Supported)
Maximum Rip to Left
10” (Table Supported)
Saw Blade Tilt Capacity
45° Maximum
Drive System Type
Triple Belt Drive
Belt Type
Standard V-Belts: A-27 (Included)
Fence Scale
0”<->50”
Miter Gauge Scale
0°/90° <->30° Left or Right
Dust Port Dimensions
4” Outside Diameter
Table Height
34-1/8” High
Fence Dimensions
37” Long x 3-3/8” Wide
Table Dimensions
36-1/8” Wide x 27-1/16” Long
Table Extension Dimensions
27” Long x 8” Wide
Net Weight
480 Lb.
Accessories
Saw Blade Guard / Miter Gauge / Rip Fence / Saw Blade Removal Tools.
save this Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
general safety rules
warning!
read and understand all instructions
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
saVe tHese instructions
worK area
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
1.