Page 12
SKU 95112
for technical questions, please call 1-800-444-3353.
unpacKing
When unpacking both boxes, check to make sure all the parts shown on the
parts
lists and assembly diagrams at the end of this manual
are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number shown on the cover of
this manual as soon as possible.
asseMbly instructions
caution!
Always make sure the Power Switch (17E) of the Table Saw is in its
“off”
position and the tool is unplugged from its electrical outlet prior to assembling the
tool, adding any accessories, or making adjustments to the tool.
to attach the crank Handles to the Hand wheels:
figure d
screw (27e)
cranK Handle
(28e)
HeX nut (29e)
tilting Hand wHeel (30e)
and
HeigHt Hand wHeel (36e)
To attach a Crank Handle (28E) to the Tilting Hand Wheel (30E) and Height Hand
Wheel (36E), insert a Screw (27E) through the Crank Handle. Loosely screw a Hex
Nut (29E) onto the threaded portion of the Screw. Screw the threaded portion of
the Screw into the Hand Wheel. Then secure the Crank Handle to the Hand Wheel
by tightening the Screw.
(see figure d.)
to install the rip fence:
fence bracKet body
(9c)
front rail
(1c)
locK Knob
(18c)
saw table
(8e)
figure e
lens
(26c)
Raise the Lock Knob (18C) on the Fence Bracket Body (9C).
(see figure e.)
Hook the back of the Fence Bracket Body (9C) over the Rear Rail (2C). Then lower
the front of the Fence Bracket Body into the groove on the Front Rail (1C).
(see figure e.)
1.
2.